Modell 5-22 / 5-26 19 G/G-A
Einfach-Rollenklammer nicht geteilter langer Arm |
5-2219G-11A | 2000 | 575 | 250-1150 | 820 | 560 | 245 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-11 | 2000 | 575 | 400-1150 | 820 | 555 | 245 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-13A | 1900 | 650 | 250-1300 | 820 | 570.4 | 260 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-13 | 1900 | 650 | 450-1300 | 820 | 565 | 260 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-14A | 1600 | 725 | 250-1450 | 820 | 590 | 275 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-14 | 1600 | 725 | 500-1450 | 820 | 585 | 275 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-15A | 1500 | 760 | 250-1520 | 820 | 615 | 291 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2219G-15 | 1500 | 760 | 500-1520 | 820 | 610 | 291 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
1-2 Rollenklammer geteilter langer Arm |
5-2619G-11A | 2000 | 575 | 250-1150 | 820 | 550 | 225 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-11 | 2000 | 575 | 400-1150 | 820 | 545 | 225 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-13A | 1900 | 650 | 250-1300 | 820 | 560.4 | 240 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-13 | 1900 | 650 | 450-1300 | 820 | 555 | 240 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-14A | 1600 | 725 | 250-1450 | 820 | 580 | 255 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-14 | 1600 | 725 | 500-1450 | 820 | 575 | 255 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-15A | 1500 | 760 | 250-1520 | 820 | 605 | 271 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
5-2619G-15 | 1500 | 760 | 500-1520 | 820 | 600 | 271 | 285 | 188 | 220 x 300 | 200 | 150 | 2 / 3 A |
Notes:
- Erforderliche Zusatzhydraulik: zweifach für die Nutzung der Klammer- und Drehfunktion
- Einschließlich einstellbarem Druckbegrenzungsventil für Öffnen und Schließen
- Standardgreifschalenbeschichtung: Generation G - Gussgreifschalen mit geriffelter Oberfläche
- Für Aufnahme liegender Rollen wird Hubmastvorneigung benötigt: Generation G: 3,5° (5° bei Gummibeschichtung) Kurzer Arm: Typ A = bei 45° verstellbar
- Ein Hydraulikdruck von Δp=150 bar muß an der Staplerkupplung anliegen.
- Geringere Drücke reduzieren die Haltefähigkeit.
Options:
- Sonderrollenbereiche
- Kurzer Arm: A=beweglich
- Beschichtungen
- - Stahlgestrahlt
- - Polyurethanbeschichtet
- - Gummi glatt