Modell 321PA (mit separatem Seitenschub)
321PA30A-56SG-3A | 3000 | 600 | 4,0/500 | 1470 | 100 | 560-2.230 | 1.350 | 60x50 | 510 | 1150 | 50 | 172 | 220 | 755 | 3A |
321PA30B-56SG-3A | 3000 | 600 | 4,0/500 | 1570 | 100 | 560-2.330 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 215 | 775 | 3A |
321PA30C-56SG-3A | 3000 | 600 | 4,0/500 | 1670 | 100 | 560-2.430 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 213 | 795 | 3A |
321PA30D-56SG-3A | 3000 | 600 | 4,0/500 | 1770 | 100 | 560-2.530 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 211 | 815 | 3A |
321PA30E-56SG-3A | 3000 | 600 | 4,0/500 | 1970 | 100 | 560-2.730 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 202 | 855 | 3A |
321PA30E-66SG-3A | 3000 | 600 | 4,0/500 | 1970 | 100 | 660-2.930 | 1350 | 60x50 | 610 | 1150 | 50 | 172 | 202 | 855 | 3A |
321PA38A-56SG-3A | 3800 | 600 | 4,5/600 | 1470 | 100 | 560-2.230 | 1350 | 60x60 | 510 | 1150 | 60 | 172 | 234 | 800 | 3A |
321PA38B-56SG-3A | 3800 | 600 | 4,5/600 | 1570 | 100 | 560-2.330 | 1350 | 60x60 | 510 | 1150 | 60 | 172 | 232 | 820 | 3A |
321PA38C-56SG-3A | 3800 | 600 | 4,5/600 | 1670 | 100 | 560-2.430 | 1350 | 60x60 | 510 | 1150 | 60 | 172 | 229 | 840 | 3A |
321PA38D-56SG-3A | 3800 | 600 | 4,5/600 | 1770 | 100 | 560-2.530 | 1350 | 60x60 | 510 | 1150 | 60 | 172 | 225 | 860 | 3A |
321PA38E-66SG-3A | 3800 | 600 | 4,5/600 | 1970 | 100 | 660-2.930 | 1350 | 60x60 | 610 | 1150 | 60 | 172 | 216 | 925 | 3A |
321PA38E-56SG-3A | 3800 | 600 | 4,5/600 | 1970 | 100 | 560-2.730 | 1350 | 60x50 | 510 | 1150 | 50 | 172 | 190 | 900 | 3A |
321PA38F-66SG-3A | 3800 | 600 | 4,5/600 | 2170 | 100 | 660- 3.130 | 1350 | 60x60 | 610 | 1000 | 60 | 172 | 190 | 900 | 3A |
Notes:
- Erforderliche Zusatzhydraulik: zweifach
- Mit separatem Seitenschub
- Alle Gabelzinken untereinander austauschbar
- 10 mm Versatz zwischen den äußeren und mittleren Zinken
- Min. Gabelträgerbreiten des Staplers 6-53/321PA -1100 mm
- Spreizabstand des inneren Zinkenpaars im geöffneten Zustand 560 mm
Options:
- Schnellwechselpratzen ISO 2328 2+3
- Automatische Dauerschmierung
- für Seitenschieber und Führungssystem (F-Serie)
- für Seitenschieber (F-Serie/ 321PA)
- Zinkenlängen 1150 mm, 1000 oder 1200 mm ohne Mehrpreis
- Andere Zinkenlängen oder -querschnitte
- Alle Zinken auf einem Niveau fluchtend
- Seitenschub +/- 150 mm
- Alternative Lastschutzgitterausführungen
- Einzelarmsteuerung
- Vorschub-3/2/1 Palettengabel